2. Bill of material
The tables contain a column named Stores. Click the red text underneath to reveal a pop-up with a list of stores. Stores that contain a checkmark have been verified and tested by either an Engineer or a trusted community member.
Kits
We do not own the kits. We’re not responsible for these kits. Make sure to check the included hardware. These kits might not contain all the hardware needed.
All kits
| Type | Stores |
|---|---|
| Click here |
Self sourcing
Bolts
Self sourcing bolts
| Size | Type | Amount | Stores |
|---|---|---|---|
| M3X6 | 6 | Click here | |
| M3X8 | 85 | Click here | |
| M3X10 | 3 | Click here | |
| M4X16 | 3 | Click here | |
| M5X8 | 4 | Click here | |
| M5X10 | 18 | Click here |
T-Nuts
| Size | Type | Amount | Stores |
|---|---|---|---|
| M3 | 24 | Click here | |
| M5 | 22 | Click here |
Extrusions
Note: Ender 5 (Pro) and Ender 5 Plus have different sizes for parts.
| Printer | Size | Type | Amount | Stores |
|---|---|---|---|---|
| Ender 5 (Pro) | 400mm | 1 | Click here | |
| Ender 5 Plus | 510mm | 1 | Click here |
Linear rails
Note: Ender 5 (Pro) and Ender 5 Plus have different sizes for parts.
| Printer | Size | Type | Amount | Stores |
|---|---|---|---|---|
| X | 100mm | 3 | Click here | |
| Ender 5 (Pro) | 400mm | 3 | Click here | |
| Ender 5 Plus | 500mm | 3 | Click here |
Leadscrew
Note: Ender 5 (Pro) and Ender 5 Plus have different sizes for parts. Leadscrews can vary in sizes.
Make sure to look for Leadscrews that include a circular T8 Nut with 4 holes.
| Printer | Size Range | Type | Amount | Stores |
|---|---|---|---|---|
| Ender 5 (Pro) | 350mm / 370mm | 3 | Click here | |
| Ender 5 Plus | 450mm / 470mm | 3 | Click here |
Magnet
| Size | Type | Amount | Stores |
|---|---|---|---|
| 12x5mm or 12x4mm | Countersunk Ring Magnet | 3 | Click here |
Bed
| Printer | Size | Type | Amount | Stores |
|---|---|---|---|---|
| Ender 5 (Pro) | 255/275mm | 1 | Click here | |
| Ender 5 Plus | 377mm | 1 | Click here | |
| Ender 5 (Pro) | 255/275mm | 1 | Click here | |
| Ender 5 Plus | 377mm | 1 | Click here | |
| X | Case specific | 1 | Click here |
Misc
| Size | Type | Amount | Stores |
|---|---|---|---|
| 2020 | 2 | Click here | |
| Heatset insert | 39 | Click here | |
| M3 Washer | Stainless Steel | 12 | Click here |
| M4 X 8 X L8 | Spacer | 3 | Click here |
| 10mm M4 | Kossel ball | 3 | Click here |
| 10x11mm - 1 Meter | R18 Drag chain | 1 | Click here |
| Nema17 | Stepper motor | 3 | Click here |
| 5mm-8mm | Shaft Coupling | 3 | Click here |
| OPTIONAL | Oldham Coupling | 3 | Click here |