4. Heated bed drawings

Click the drawing to enlarge the image, this works best on a desktop monitor.

1. Heated bed drawing
   1. Ender 5 (Pro)
      1. 255x255 Bed
         1. Drawing
      2. 275x275 Bed
         1. Drawing
   2. Ender 5 plus
      1. 377x370 Bed
         1. Drawing
   3. Ender 5 plus
      1. 410x410 Bed
         1. Drawing

Heated bed drawing

You’ll find 3 images, all 3 images contain different bed dimensions. The holes are relative to the corners and edges.

Something you wont find on these drawings is the thickness of the bed. For thermal stability and proper bolt engagement we recommend a bed thickness anywhere from 8 to 10mm.

Ender 5 (Pro)

255x255 Bed

Drawing

Hover drawing and click image to enlarge

Download: 255x255.dxf

275x275 Bed

Planning to use a 275x275 Bed on the Mercury 1.1? Must read information for you.

1. A 275x275 bed requires 330mm rails on X and Y.
2. The Eva setup will cause you to lose a little travel (3 to 8mm depending on installation) on Y.

Drawing

Hover drawing and click image to enlarge

Download: 275x275.dxf

Ender 5 plus

377x370 Bed

Drawing

Hover drawing and click image to enlarge

Download: 377x370.dxf

Ender 5 plus

410x410 Bed

Drawing

Hover drawing and click image to enlarge

Download: 410x410.dxf

Next step →